How To Download Xfinity App On Lg Smart Tv

Using Developer Mode App

After you consummate developing your app, you lot might need to test your app. The Developer Mode app provides a faster fashion to install, debug, and test webOS Television set apps on the TV. The following introduces the concept behind the Developer Way app that connects between the Goggle box and the PC.

To use the Developer Mode app, the following should be set in advance:

• webOS Tv connected with a network

• PC connected with a network and installed with the webOS Telly SDK

• LG Programmer site account
  The Developer Mode app requires you to sign in to the LG Programmer site. If you practice non have an account yet, see Preparing a Login Account.

This commodity provides:

• Installing Developer style app

• Turning Developer mode on

• Connecting Television and PC

• Extending Programmer manner fourth dimension

• Clearing cache data of apps

Installing Programmer Mode App

To install the Developer Mode app, follow the steps below:

1. Outset, plough on your webOS Tv set and check if your webOS TV is continued to a network.

2. Sign in with your LG Developer site account.

3. Go to the LG Content Store.

4. Search for "Programmer Mode."

5. Select the Developer Style app and click the Install push button.

Turning Developer Way On

After installing the Developer Mode app, you lot can enable Developer Fashion on your TV.

1. Run the Programmer Mode app from the webOS Television Launcher.

2. Enter your email-based ID and password of the LG Developer site. If you do not have the account, see Preparing Account.
   

3. Click the Dev Way Status button to enable the Developer Mode. The TV will reboot.
   

Developer Mode is disabled:

• After the TV reboot ten times while the TV is not connected to a network.

• Later the TV reboot when the remaining session time has run out.

• Subsequently the TV reboot when you sign in to another TV with the same business relationship.

If yous sign in to multiple TVs with one account, only the session of the latest TV that you lot sign in to is maintained.

After Programmer Way is disabled, the installed apps that yous were using on Developer Mode are uninstalled, and yous will exist taken to the log-in screen of the Programmer Manner app.

Connecting TV and PC

This section describes how to connect webOS Tv set and your PC. You tin utilize either the CLI or IDE for the Programmer Mode app.

Connecting with CLI

Follow the instructions below to add the target Television set with the CLI:

1. Run the webOS Telly CLI.

2. Execute the ares-setup-device control. And so, select add.

   ares-setup-device

   name deviceinfo connection profile
   -------- ------------------------ ---------- -------
   emulator programmer@127.0.0.1:6622 ssh idiot box

   ** You can modify the device info in the above listing, or add new device.
   ? Select: (Utilize arrow keys)
   > add
   modify
   remove

3. Input the information about your TV as below instance:

   Yous do not need to enter the countersign. When using the Developer Mode app, a password is not required.

   ** You can modify the device info in the higher up list, or add together new device.
   ? Select: add
   ? Enter Device Name: tv2
   ? Enter Device IP address: 10.123.45.67
   ? Enter Device Port: 9922
   ? Enter ssh user: prisoner
   ? Enter description: new device
   ? Select authentification: password
   ? Enter password:
   ? Relieve ? Yes
   proper noun deviceinfo connexion profile
   -------- -------------------------- ---------- -------
   tv2 prisoner@10.123.45.67:9922 ssh tv
   emulator developer@127.0.0.1:6622 ssh tv

4. Later adding your Television receiver every bit the target device, check the result with the command below:

   ares-setup-device --list

5. Click the Primal Server button in the Developer Manner app.
   

6. Become the central file from your webOS Boob tube with the following command on your PC:

   ares-novacom --device tv2 --getkey

7. A control prompt appears to enter Passphrase. Enter the exact characters (case sensitive) equally displayed on your Tv screen.
   You can see Passphrase, which consists of 6 characters, on the bottom left side of the Programmer Mode app screen.

   input passphrase [default: webos]:

8. Cheque the connection with your TV and PC with the post-obit command:

   ares-device-info --device tv2

   If the connection is established successfully, the device data is displayed as below. The data might differ depending on your Boob tube device.

   modelName : WEBOS6.0
   sdkVersion : 6.ane.0
   firmwareVersion : 00.00.00
   boardType : K7LP_ATSC_KR
   otaId : HE_DTV_W21P_AFADATAA

9. At present, y'all are ready to install and launch your app on your existent Idiot box. To find out how to install and launch your app on your TV, see Installing and launching your app using CLI.

Connecting with VS Code Extension

Follow the instructions beneath to add your TV as the target device using the VS Code Extension:

1. Run VS Code with webOS TV VS Lawmaking Extension installed.

2. Select webOS TV: Set Device from the Command Palette (Ctrl+Shift+P) and select Add together Device.
   
   You can likewise click the Add Device icon on the webOS TV Devices in the Activity Bar.
   

3. Enter the information about your Telly as below case:

   1. Enter your device proper noun.

   2. Enter your device's IP accost.

   3. Enter your device's port number for the connection. In nearly situations, press Enter to set it as the default value (22).

   4. Enter the device's username for connection. In most situations, press Enter to set up it every bit the default value (root).

4. Click the Primal Server button in the Programmer Style app.
   

5. Select webOS TV: Prepare SSH Key from the Command Palette (Ctrl+Shift+P) on VS Code and select your device.
   
   Y'all tin too right-click on the device and select Gear up Up SSH Key on the webOS Tv set Devices in the Activity Bar.
   

6. Enter the passphrase (case sensitive) as displayed on the Developer Fashion app.
   

7. Refresh the device listing. Y'all can run across the inverse username and port number.
   

Connecting with IDE

Follow the instructions below to add your Telly as the target device using the IDE:

1. Run the webOS TV IDE.

2. Click New Connectedness () from the Target Configuration screen.

3. Enter the data most your Television equally beneath example:

   • Prepare Device Type as LG Smart Tv.

   • Change Device Name as you desire

   • Input the IP address of your TV.

   

4. Click the Key Server push in the Developer Mode app.
   

5. Right-click the created target device and select Generate Key.
   

6. The webOS key window appears to enter Passphrase. Enter the exact characters (case sensitive) as displayed on your Goggle box screen.
   You tin see Passphrase, which consists of 6 characters, on the lesser left side of the Developer Mode app screen.
   

7. Connect your TV using the correct-click menu. Then yous can come across the apps you installed on the Idiot box nether boob tube > Installed. If information technology is your showtime time using the Developer Mode app, no app is shown on the screen.
   

8. Now, you are ready to install and launch your app on your real Boob tube. To find out how to install and launch your app on your TV, encounter Installing and launching your app using IDE.

Extending Developer Manner Fourth dimension

Developer Mode enables for a limited time. When you lot plow on Programmer Way, you lot can check the remaining session time on the Remain Session field. To extend the remaining time, connect the TV to a network and click the EXTEND button. If the session fourth dimension runs out, yous cannot extend the session time. Yous can as well extend the session time with the ares-extend-dev command of CLI.

Clearing Cache Information of Apps

The Developer Mode app provides the Articulate Cache Data feature for testing. Note that all apps' cache data is removed. To clear cache information of all apps, follow the instructions below:

1. Click theON button on the Clear Enshroud Data field.
   

2. Reboot the Boob tube.

Source: https://webostv.developer.lge.com/develop/app-test/using-devmode-app/

Posted by: barkerarmompass.blogspot.com

Share this post